CANISTER > REASSEMBLY |
| 1. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY |
![]() |
Install the spring.
![]() |
Install the fuel sub-tank.
![]() |
Install a new retainer ring.
| 2. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY |
![]() |
Apply gasoline to 2 new O-rings.
![]() |
Install the pressure regulator assembly.
| 3. INSTALL FUEL PUMP |
![]() |
Apply gasoline to a new O-ring, and then install the fuel pump spacer and new O-ring onto the fuel pump.
![]() |
Connect the fuel pump harness.
![]() |
Engage the 5 claws of the suction filter with fuel pump.
![]() |
Engage the 2 claws of the fuel suction support.
![]() |
Engage the 2 claws of the fuel suction support and install the fuel filter and fuel pump onto the fuel sub-tank.
![]() |
Connect the fuel tube.
![]() |
Connect the connector of the fuel pump harness.
| 4. INSTALL FUEL SENDER GAUGE ASSEMBLY |
![]() |
Install the fuel sender gauge onto the fuel suction with pump and gauge tube.
![]() |
Connect the fuel sender gauge connector.