METER / GAUGE SYSTEM (for Hatchback) > DTC CHECK / CLEAR |
| CHECK DTC |
![]() |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the intelligent tester on.
Select the following menu items: Body / Combination Meter / DTC.
Check DTCs and then write them down.
Confirm the details of the DTCs.
| CLEAR DTC (Using the intelligent tester) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON (do not start the engine) and turn the intelligent tester on.
Select the following menu items: Body / Combination Meter / DTC / Clear.
Erase DTCs by pressing the YES button on the tester.
| CLEAR DTC (Not using the intelligent tester) |
Remove the ECU-B fuse from the engine room R/B for more than 60 seconds, or disconnect the negative battery cable for more than 60 seconds. When disconnecting the negative battery cable, perform the "INITIALIZE" procedure.