Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2NZ-FE ENGINE CONTROL SYSTEM

2NZ-FE ENGINE CONTROL SYSTEM > SERVICE DATA



Camshaft timing oil control valve assembly
Standard resistance
6.9 to 7.9 Ω at 20 °C (68°F)
Camshaft position sensor
Standard resistance
1,630 to 2,740 Ω at cold
2,065 to 3,225 Ω at hot
Crankshaft position sensor
Standard resistance
985 to 1,600 Ω at cold
1,265 to 1,890 Ω at hot
Engine coolant temperature sensor
Standard resistance
2.32 to 2.59 kΩ
Approximately 20°C (68°F)
0.310 to 0.326 kΩ
Approximately 80°C (176°F)
Throttle with motor body assembly
Standard resistance
1 (M-) - 2 (M+)
0.3 to 100 Ω at 20°C (68°F)
EFI (20A) fuse
Standard resistance
1 - 2
Below 1 Ω
Knock sensor
Standard resistance
120 to 280 kΩ at 20°C (68°F)
Integration relay
A1 - C1
Below 1 Ω
A1 - A4
10 kΩ or higher
A4 - C1
10 kΩ or higher
A1 - A4
Below 1 Ω
(Apply battery voltage between terminals A2 and A3)
A4 - C1
Below 1 Ω
(Apply battery voltage between terminals A2 and A3)
Accelerator pedal position No. 1 standard voltage
Standard resistance
Accelerator pedal released
Accelerator pedal depressed
0.5 to 1.1 V
2.6 to 4.5 V
Accelerator pedal position No. 2 standard voltage
Standard resistance
Accelerator pedal released
Accelerator pedal depressed
1.2 to 2.0 V
3.4 to 5.0 V