Home › BODY › EXTERIOR › REAR BUMPER (for Hatchback)

REAR BUMPER (for Hatchback) > REASSEMBLY

for Preparation Click here



1. INSTALL LICENSE PLATE LIGHT ASSEMBLY (w/o Energy Absorber)


    B114626
  1. Engage the 6 claws and install the license plate light.



2. INSTALL LICENSE PLATE LIGHT ASSEMBLY (w/ Energy Absorber)


    B114625
  1. Engage the 2 claws and install the license plate light.



3. INSTALL REAR BUMPER ENERGY ABSORBER LH (w/ Energy Absorber)


    B208840E01
  1. Apply 2 new pieces of tape.



    B208839
  1. Install the rear bumper energy absorber with the clip.



4. INSTALL REAR BUMPER ENERGY ABSORBER RH (w/ Energy Absorber)

HINT:
Use the same procedure as for the LH side.