Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2NZ-FE EMISSION CONTROL

2NZ-FE EMISSION CONTROL > SERVICE DATA



Variable resistor
Standard resistance
E2 - VC

3.5 to 6.5 kΩ
Standard resistance
E2 - VC at turning the idle mixture adjusting screw fully clockwise and counterclockwise
Resistance oscillates between approximately 5 kΩ to 0 Ω accordingly
Idle CO concentration:
1.0 to 2.0 %
Standard voltage
E2 - VC

4.5 to 5.5 V
VSV
Standard resistance
1 - 2

26 to 30 Ω at 20°C (68°F)
Heated oxygen sensor (for Sensor 1)
Standard resistance
1 (HT1A) - 2 (+B)
1 (HT1A) - 4 (E2)

5.3 to 7.5 Ω at 20 °C (68 °F)
10 kΩ or higher
Heated oxygen sensor (for Sensor 2)
Standard resistance
1 (HT1B) - 2 (+B)
1 (HT1B) - 4 (E2)

11 to 16 Ω at 20 °C (68 °F)
10 kΩ or higher