1NZ-FE STARTING > SERVICE DATA |
| Starter assembly | Standard current | 90 A or less at 11.5 V |
| Starter relay | Standard resistance 3 - 5 | Below 1 Ω(when battery voltage applied to terminals 1 and 2) |
| 10 kΩ or higher | ||
| ACC cut relay | Standard resistance 3 - 4 | Below 1 Ω |
| 10 kΩ or higher (when battery voltage applied to terminals 1 and 2) | ||
| Standard resistance 3 - 5 | Below 1 Ω(when battery voltage applied to terminals 1 and 2) | |
| 10 kΩ or higher | ||
| AM2 fuse | Standard resistance 1 - 2 | Below 1 Ω |
| IG2 relay | Standard resistance B1 - C1 | Below 1 Ω |
| Standard resistance B1 - B4 | 10 kΩ or higher | |
| Standard resistance B4 - C1 | 10 kΩ or higher | |
| Standard resistance B1 - B4 | Below 1 Ω (Apply battery voltage between terminals B2 and B3) | |
| Standard resistance B4 - C1 | Below 1 Ω (Apply battery voltage between terminals B2 and B3) | |
| Ignition relay | Standard resistance 3 - 5 | Below 1 Ω(when battery voltage applied to terminals 1 and 2) |
| 10 kΩ or higher | ||
| Ignition or starter switch assembly. | Standard resistance Between all terminals | 10 kΩ or higher (LOCK) |
| Standard resistance 2-4 | Below 1 Ω (ACC) | |
| Standard resistance 1-2-4 | Below 1 Ω (ON) | |
| Standard resistance 5-6 | ||
| Standard resistance 1-3-4 | Below 1 Ω (START) | |
| Standard resistance 5-6-7 | ||
| Starter armature assembly resistance | Segments | Below 1Ω |
| Commutator-Armature coil | 10kΩ or higher | |
| Starter armature assembly commutator circumference runout | Maximum runout | 0.05mm (0.0020in.) |
| Starter armature assembly commutator diameter | Standard diameter | 28.0mm (1.1024 in.) |
| Minimum diameter | 27.0mm (1.0630 in.) | |
| Starter armature assembly undercut portion | Standard undercut depth | 0.6mm (0.0236 in.) |
| Minimum undercut depth | 0.2mm (0.0079 in.) | |
| Starter yoke assembly resistance | Terminal C-Field coil brush lead | Below 1Ω |
| Brush lead-starter yoke | 10kΩ or higher | |
| Brush length | Standard length | 14mm (0.5511 in.) |
| Minimum length | 9mm (0.3543 in.) | |
| Starter brush holder assembly resistance | Standard resistance | 10kΩ or higher |
| Magnet starter switch assembly resistance | Terminal C-Terminal 50 | Below 1Ω |
| Terminal 50-Magnet starter switch assembly | Below 2Ω |