Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 1NZ-FE COOLING

1NZ-FE COOLING > SERVICE DATA



Thermostat
Valve opening temperature
80 to 84°C (176 to 183°F)
Valve lift
8.5 mm (0.335 in.) or more at 95°C (203°F)
Cooling fan relay
Standard resistance
B5 - B8
10 kΩ or higher
Standard resistance
B5 - B8
Below 1 Ω
(Apply battery voltage between terminals B6 and B7)
Cooling fan motor
For Australia and G.C.C. Countries: w/ A/C
12.1 to 15.1 A (at 12V)
Except for Australia and G.C.C. Countries: w/ A/C
7.3 to 9.3A (at 12V)
w/o A/C
5.2 to 8.2A (at 12V)
Cooling fan relay No.2
3-4
Below 1Ω
3-4 (When battery voltage applied to terminals 1 and 2)
10kΩ or higher
3-5
10kΩ or higher
3-5 (When battery voltage applied to terminals 1 and 2)
Below 1Ω
Radiator cap sub-assembly
Standard valve (for brand new cap)
93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi)
Minimum standard valve (after using cap)
78.5 kPa (0.8 kgf/cm2, 11.4 psi)
Cooling fan resistor
at 20°C (68°F)
1.17 to 1.43 Ω