REAR SEAT ASSEMBLY (for Sedan Split Seat Type LH Side) > INSTALLATION |
| 1. INSTALL REAR SEATBACK ASSEMBLY |
![]() |
Insert the 2 hooks into the rear seatback frame hole and install the rear seatback tightening the 2 bolts in the sequence shown in the illustration.
![]() |
Install the rear seatback cover with the 2 clips.
Pull up the rear seatback.
![]() |
Install the rear seat outer belt into the rear seat shoulder belt guide.
| 2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
![]() |
Pass the rear seat inner belt through the rear seat cushion slit.
Engage the 3 hooks and install the rear seat cushion cover pad.