Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Sedan Split Seat Type LH Side)

REAR SEAT ASSEMBLY (for Sedan Split Seat Type LH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B134922
  1. Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.

    NOTICE:
    Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.

  1. Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.



2. REMOVE REAR SEATBACK ASSEMBLY


    B134924
  1. Remove the rear seat outer belt from the rear seat shoulder belt guide.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.



    B134925
  1. Using a clip remover, remove the 2 clips and the rear seatback cover.



    B134926
  1. Remove the 2 bolts, the 2 hooks and the rear seatback.