Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Sedan Split Seat Type LH Side)

REAR SEAT ASSEMBLY (for Sedan Split Seat Type LH Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seatback frame could cause injuries to your hands.



1. INSTALL REAR SEATBACK LOCK ASSEMBLY


    B134940
  1. w/ Cancel Function:

    1. Install the rear seatback lock with the 2 bolts.

      Torque:
      19.1 N*m{ 195 kgf*cm , 14 ft.*lbf }



    B134941
  1. w/o Cancel Function:

    1. Install the rear seatback lock with the 2 bolts.

      Torque:
      19.1 N*m{ 195 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY


    B134939
  1. Install the rear seatback frame.



    B134935E01
  1. Using hog ring pliers, install 8 new hog rings as shown in the illustration.



    B134933
  1. Install the rear seatback cover with the 6 clips.



3. INSTALL REAR SEATBACK STOP BUTTON GROMMET


    B134938
  1. Engage the 2 claws and install the rear seatback stop button grommet.



4. INSTALL REAR SEAT HEADREST SUPPORT


B134937E01

HINT:
Use the same procedure for both sides.

  1. Align the protruding portion of the front seat headrest support with the installation groove of the rear seatback frame.

  1. Engage the 2 claws and install the rear seat headrest support.



5. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (w/ Cancel Function)


    B134932
  1. Engage the 2 claws and install the rear seatback lock control bezel.



6. INSTALL REAR SEATBACK LOCK RELEASE BUTTON


    B134931
  1. Install the rear seatback lock release button.



7. INSTALL REAR SEAT SHOULDER BELT GUIDE


    B134930
  1. Insert the pin into the rear seatback frame hole and install the rear seat shoulder belt guide with the 2 screws.



8. INSTALL REAR SEAT HEADREST ASSEMBLY


    B134928E01
  1. Push the lock button of the rear seat headrest support and install the rear seat headrest.