REAR SEAT ASSEMBLY (for Sedan Split Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE REAR SEAT HEADREST ASSEMBLY |
![]() |
Push the lock button of the rear seat headrest support and remove the rear seat headrest.
| 2. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (w/ Rear Center Seat Headrest) |
![]() |
Push the lock button of the rear seat headrest support and remove the rear center seat headrest.
| 3. REMOVE REAR SEAT SHOULDER BELT GUIDE |
![]() |
Remove the 2 screws and the rear seat shoulder belt guide.
| 4. REMOVE REAR SEATBACK LOCK RELEASE BUTTON |
![]() |
Remove the rear seatback lock release button.
| 5. REMOVE REAR CENTER SEAT SHOULDER BELT GUIDE (for 3 Point Type Rear Center Seat Belt) |
![]() |
Remove the 2 screws and the rear seat center shoulder belt guide.
| 6. REMOVE REAR SEATBACK LOCK CONTROL BEZEL (w/ Cancel Function) |
![]() |
Disengage the 2 claws and remove the rear seatback lock control bezel.
| 7. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY |
![]() |
Using a clip remover, remove the 7 clips and open the rear seatback cover.
![]() |
Remove the 2 nuts, the 2 wave washers and the rear seat center armrest.
| 8. REMOVE REAR SEAT CENTER ARMREST HINGE COVER |
![]() |
Disengage the 3 claws and remove the rear seat center armrest hinge cover.
| 9. REMOVE REAR SEAT CENTER ARMREST HINGE |
![]() |
Remove the 2 bolts, the 2 spacers and the rear seat center armrest hinge.
| 10. REMOVE CUP HOLDER ASSEMBLY |
![]() |
Disengage the 4 claws and remove the cup holder.
| 11. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Remove the 9 hog rings.
![]() |
w/ Rear Center Seat Headrest:
Disengage the 2 claws and remove the rear seat headrest support.
w/o Rear Center Seat Headrest:
Disengage the 2 claws and remove the rear seat headrest support.
| 12. REMOVE REAR SEATBACK STOP BUTTON GROMMET (for 2 Point Type Rear Center Seat Belt) |
![]() |
Remove the 2 claws and remove the rear seatback stop button grommet.
| 13. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY |
![]() |
Remove the rear seatback frame.
| 14. REMOVE REAR SEATBACK LOCK ASSEMBLY |
![]() |
w/ Cancel Function:
Remove the 2 bolts and the rear seatback lock.
![]() |
w/o Cancel Function:
Remove the 2 bolts and the rear seatback lock.