Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Sedan Split Seat Type RH Side)

REAR SEAT ASSEMBLY (for Sedan Split Seat Type RH Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seatback frame could cause injuries to your hands.



1. INSTALL REAR SEATBACK LOCK ASSEMBLY


    B134965
  1. w/ Cancel Function:

    1. Install the rear seatback lock with the 2 bolts.

      Torque:
      19.1 N*m{ 195 kgf*cm , 14 ft.*lbf }



    B134966
  1. w/o Cancel Function:

    1. Install the rear seatback lock with the 2 bolts.

      Torque:
      19.1 N*m{ 195 kgf*cm , 14 ft.*lbf }



2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY


    B134964
  1. Install the rear seatback frame.



    B134961E01
  1. Using hog ring pliers, install 9 new hog rings as shown in the illustration.



3. INSTALL REAR SEATBACK STOP BUTTON GROMMET (for 2 Point Type Rear Center Seat Belt)


    B138523
  1. Engage the 2 claws and install the rear seatback button grommet.



4. INSTALL REAR SEAT HEADREST SUPPORT


    B134963E01
  1. w/ Rear Center Seat Headrest:

    1. Engage the 2 claws and install the rear seat headrest support.

      HINT:
      Use the same procedure to install the 4 rear seat headrest supports.

  1. w/o Rear Center Seat Headrest:

    1. Engage the 2 claws and install the rear seat headrest support.

      HINT:
      Use the same procedure to install the 2 rear seat headrest supports.



5. INSTALL CUP HOLDER ASSEMBLY


    B134959
  1. Engage the 4 claws and install the rear seat cup holder.



6. INSTALL REAR SEAT CENTER ARMREST HINGE


    B134958
  1. Install the rear seat center armrest hinge with the 2 bolts and the 2 spacers.

    Torque:
    21 N*m{ 215 kgf*cm , 16 ft.*lbf }



7. INSTALL REAR SEAT CENTER ARMREST HINGE COVER


    B134957
  1. Engage the 3 claws and install the rear seat center armrest hinge cover.



8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    B134956
  1. Install the rear seat center armrest with the 2 nuts and the 2 wave washers.

    Torque:
    33 N*m{ 335 kgf*cm , 24 ft.*lbf }



    B134955
  1. Install the rear seatback cover with the 7 clips.



9. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (w/ Cancel Function)


    B134954
  1. Engage the 2 claws and install the rear seatback lock control bezel.



10. INSTALL REAR CENTER SEAT SHOULDER BELT GUIDE (for 3 Point Type Rear Center Seat Belt)


    B134952
  1. Insert the pin into the rear seatback frame hole and install the rear seat center shoulder belt guide with the 2 screws.



11. INSTALL REAR SEATBACK LOCK RELEASE BUTTON


    B134953
  1. Install the rear seatback lock release button.



12. INSTALL REAR SEAT SHOULDER BELT GUIDE


    B134950
  1. Insert the pin into the rear seatback frame hole and install the rear seat shoulder belt guide with the 2 screws.



13. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)


    B134948E01
  1. Push the lock button of the rear center seat headrest support and install the rear center seat headrest.



14. INSTALL REAR SEAT HEADREST ASSEMBLY


    B134947E01
  1. Push the lock button of the rear seat headrest support and install the rear seat headrest.