Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN (for Sedan)

LOW PITCHED HORN (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL LOW PITCHED HORN ASSEMBLY


    B134902E01
  1. Install the low pitched horn with the bolt.

    Torque:
    19.5 N*m{ 200 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Do not place the low pitched horn over the stopper of body.

  1. Connect the low pitched horn connector.



2. INSTALL FRONT BUMPER COVER


    B134801
  1. w/ Fog Light:

    1. Connect the 2 fog light connectors.

    2. Engage the 6 claws and install the front bumper cover.



    B134800
  1. w/o Fog Light:

    1. Engage the 6 claws and install the front bumper cover.



    B134805
  1. Install the 6 clips.

  1. Install the 2 screw grommets.

  1. Tighten the 7 screws and 3 bolts.



    B134799E01
  1. Remove the protective tape.