Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN (for Sedan)

LOW PITCHED HORN (for Sedan) > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER COVER


    B134799E01
  1. Apply protective tape, as shown in the illustration.



    B134803
  1. Remove the 7 screws and 3 bolts.

  1. Remove the 2 screw grommets.

  1. Remove the 6 clips.



    B134801
  1. w/ Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.

    2. Disconnect the 2 fog light connectors.



    B134800
  1. w/o Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.



2. REMOVE LOW PITCHED HORN ASSEMBLY


    B134901
  1. Disconnect the low pitched horn connector.

  1. Remove the bolt and the low pitched horn.