Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan)

REAR CENTER SEAT INNER BELT ASSEMBLY (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY


    B134910E01
  1. for RH Side:

    1. for 2 Point Type Rear Center Seat Belt:

      1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.



    2. B134908E01
    3. for 3 Point Type Rear Center Seat Belt (for 60/40 Split Seat Type):

      1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.



    B134905E01
  1. for LH Side:

    1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.



2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
  1. for 60/40 Split Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly .

  1. for Fixed Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly .