Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Sedan)

FRONT SEAT ASSEMBLY (for Sedan) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the front seat adjuster frame could cause injuries to your hands.

HINT:
The procedure described below is for the driver side of LHD. Use the same procedure for both the front passenger and driver sides of LHD, unless otherwise specified.



1. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    B138350
  1. for Driver Side:

    1. Disengage the claw and remove the connector.

    2. Remove the 2 clamps.

    3. Using a clip remover, remove the clamp.



    B138353
  1. for Front Passenger Seat:

    1. Disconnect the occupant detection sensor connector.

    2. Disengage the claw and remove the connector.

    3. Remove the 2 clamps.

    4. Using a clip remover, remove the clamp.



    B138351
  1. Remove the wire harness from the claw of the front seat cushion inner shield.

  1. Remove the nut and the front seat inner belt.



2. REMOVE FRONT SEAT CUSHION INNER SHIELD


    B138327E01
  1. Remove the screw.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and the clip and remove the front seat cushion outer shield.



3. REMOVE VERTICAL ADJUSTER COVER (w/ Vertical Adjuster)


    B138320E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the vertical adjuster cover.



4. REMOVE VERTICAL ADJUSTER KNOB (w/ Vertical Adjuster)


    B138322
  1. Remove the 2 screws and the vertical adjuster knob.



5. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B138323E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the reclining adjuster release handle.



6. REMOVE FRONT SEAT CUSHION OUTER SHIELD


    B138325E01
  1. Remove the screw.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and the clip and remove the front seat cushion outer shield.



7. REMOVE FRONT SEAT CUSHION COVER PAD


    B138330
  1. for Driver Side:

    1. Disengage the 2 claws and 7 hooks.



    B138331
  1. for Front Passenger Side:

    1. Disengage the 2 claws and remove the occupant detection sensor connector.

    2. Disengage the 2 claws and 7 hooks.



    B138329
  1. Using a clip remover, remove the 2 clips and the front seat cushion cover pad.



8. REMOVE FRONT SEAT HEADREST SUPPORT


    B138336
  1. Remove the 3 hog rings.



    B138334
  1. Remove the 2 hog rings.



    B138332
  1. Disengage the 2 claws and remove the front seat headrest support.

    HINT:
    Use the same procedure for both sides.



9. REMOVE FRONT SEATBACK COVER PAD


    B138338
  1. Remove the front seatback cover pad.



10. REMOVE VERTICAL ADJUSTER SPACER (w/ Vertical Adjuster)


    B138340
  1. Disengage the claw and remove the vertical adjuster spacer.



11. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    B138341
  1. Remove the screw.

  1. Disengage the claw and remove the reclining adjuster inside cover.



12. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    B138342
  1. w/ Front Seat Side Airbag:

    1. Remove the clamp.

  1. Remove the screw.

  1. Disengage the claw and remove the reclining adjuster inside cover.



13. REMOVE RECLINING ADJUSTER OUTSIDE COVER RH


    B138343
  1. Remove the screw and the reclining adjuster outside cover.



14. REMOVE RECLINING ADJUSTER OUTSIDE COVER LH

HINT:
Use the same procedure as for the RH side.



15. REMOVE FRONT SEAT CUSHION LOWER SHIELD RH


    B138344
  1. w/ Vertical Adjuster:

    1. Remove the screw.

    2. Disengage the claw and remove the front seat cushion lower shield.



    B138346
  1. w/o Vertical Adjuster:

    1. Remove the screw.

    2. Disengage the 2 claws and remove the front seat cushion lower shield.



16. REMOVE FRONT SEAT CUSHION LOWER SHIELD LH


    B138345
  1. w/ Vertical Adjuster:

    1. Remove the screw.

    2. Disengage the 2 claws and remove the front seat cushion lower shield.



    B138347
  1. w/o Vertical Adjuster:

    1. Remove the screw.

    2. Disengage the claw and remove the front seat cushion lower shield.



17. REMOVE FRONT SEAT CUSHION PROTECTOR


    B138348
  1. Remove the 2 front seat cushion protectors.