Home › RESTRAINTS › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT (for Sedan)

FRONT PASSENGER SEAT BELT WARNING LIGHT (for Sedan) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL


B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


B132318
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.



4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


B132317
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.



5. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1


E116832
  1. Disengage the 4 claws and 5 clips and remove the instrument cluster finish panel.



6. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY


B132395
  1. Disengage the 2 claws and 4 clips and remove the instrument cluster panel center.



7. REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY


    E127121
  1. Disengage the 8 claws and remove the instrument panel center register.



8. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)


    B138529
  1. Disengage the 3 claws and remove the hazard warning signal switch.