Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Sedan)

RADIO RECEIVER (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY (except Integrated with Panel)
  1. Connect the plug.

  1. Connect the 2 radio connectors.



    E223356
  1. Align the 2 bosses of the instrument panel with the hole in the radio bracket.

  1. Install the radio receiver with the 4 bolts.



2. INSTALL RADIO RECEIVER ASSEMBLY (for Integrated with Panel)
  1. Connect the plug.

  1. Connect the 3 radio connectors.



    E223355
  1. Align the 2 bosses of the instrument panel with the hole in the radio bracket.

  1. Engage the 4 clips and 4 claws and install the radio receiver.

  1. Tighten the 4 bolts.

  1. Connect the hazard warning signal switch connector.



3. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (except Integrated with Panel)
  1. Engage the 2 claws and 4 clips and install the instrument cluster finish panel center.



4. INSTALL INSTRUMENT CLUSTER FINISH PANEL


E116833
  1. Fit the 2 claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.



    E116834
  1. Engage the 5 claws and 5 clips and install the instrument cluster finish panel.



5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


B132318
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end RH.



6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


B132317
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.



7. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL


B132316
  1. Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.