RADIO RECEIVER (for Sedan) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL |
![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH |
![]() |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.
| 4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
![]() |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
| 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 |
![]() |
Disengage the 4 claws and 5 clips and remove the instrument cluster finish panel.
| 6. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Disengage the 2 claws and 4 clips and remove the instrument cluster panel center.
| 7. REMOVE RADIO RECEIVER ASSEMBLY |
![]() |
Remove the 4 bolts and the radio receiver.
![]() |
Disconnect the plug.
Disconnect the 2 radio connectors.