Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Sedan)

RADIO RECEIVER (for Sedan) > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL


B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



2. REMOVE INSTRUMENT PANEL FINISH PANEL END RH


B132318
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.



3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


B132317
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.



4. REMOVE INSTRUMENT CLUSTER FINISH PANEL


E116832
  1. Disengage the 4 claws and 5 clips and remove the instrument cluster finish panel.



5. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (except Integrated with Panel)


B132395
  1. Disengage the 2 claws and 4 clips and remove the instrument cluster panel center.



6. REMOVE RADIO RECEIVER ASSEMBLY (except Integrated with Panel)


    B138302
  1. Remove the 4 bolts and the radio receiver.



    B138304
  1. Disconnect the plug.

  1. Disconnect the 2 radio connectors.



7. REMOVE RADIO RECEIVER ASSEMBLY (for Integrated with Panel)


    B138579
  1. Disconnect the hazard warning signal switch connector.

  1. Remove the 4 bolts.



    B138580
  1. Disengage the 4 clips and the 4 claws and remove the radio receiver.



    B138582
  1. Disconnect the plug.

  1. Disconnect the 3 radio connectors.