Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Sedan)

RADIO RECEIVER (for Sedan) > REASSEMBLY

for Preparation Click here



1. INSTALL RADIO BRACKET RH


    B138312
  1. w/ CD Player:

    1. Align the 4 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 4 screws.



    B138310
  1. w/o CD Player:

    1. Align the 2 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 2 screws.



2. REMOVE RADIO BRACKET LH

HINT:
Use the same procedure as for the RH side.



3. INSTALL STEREO OPENING COVER (w/o CD Player)


    B138308
  1. Align the 4 bosses of the radio bracket with the hole in the stereo opening cover and install the stereo opening cover.

  1. Tighten the 4 screws.



4. INSTALL RADIO RECEIVER PANEL (w/o CD Player)


B138306

HINT:
Use the same procedure for both sides.

  1. Align the 3 bosses of the radio bracket with the hole in the radio receiver panel and install the radio receiver panel with the 3 screws.