Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Sedan)

RADIO RECEIVER (for Sedan) > REASSEMBLY

for Preparation Click here



1. INSTALL RADIO BRACKET RH (except Integrated with Panel)


    E223351
  1. w/ CD Player:

    1. Align the 6 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 4 screws.



    E223352
  1. w/o CD Player:

    1. Align the 3 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 2 screws.



2. INSTALL RADIO BRACKET LH (except Integrated with Panel)

HINT:
Use the same procedure as for the RH side.



3. INSTALL RADIO BRACKET RH (for Integrated with Panel)


    E223350
  1. Align the 6 bosses of the radio bracket with the hole in the radio receiver and install the radio bracket with the 2 screws.



4. INSTALL RADIO BRACKET LH (for Integrated with Panel)

HINT:
Use the same procedure as for the RH side.



5. INSTALL STEREO OPENING COVER (w/o CD Player)


    E223353
  1. Align the 4 bosses of the radio bracket with the hole in the stereo opening cover and install the stereo opening cover.

  1. Tighten the 4 screws.



6. INSTALL RADIO RECEIVER PANEL (w/o CD Player)


E223354

HINT:
Use the same procedure for both sides.

  1. Align the 3 bosses of the radio bracket with the hole in the radio receiver panel and install the radio receiver panel with the 3 screws.



7. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY (for Integrated with Panel)


    E127121
  1. Engage the 8 claws and install the instrument panel center register.