AUDIO AND VISUAL SYSTEM > Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |

| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - STEREO JACK ADAPTER) |
![]() |
Disconnect the D53 radio receiver connector.
Disconnect the D89 stereo jack adapter connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| D53-19 (AUXI) - D89-4 (AUXO) | Always | Below 1 Ω |
| D53-17 (ALI) - D89-1 (ALO) | ||
| D53-15 (ARI) - D89-2 (ARO) | ||
| D53-16 (ASGN) - D89-3 (ASGN) | ||
| D53-18 (AGND) - D89-5 (AGND) | ||
| D53-19 (AUXI) or D89-4 (AUXO) - Body ground | Always | 10 kΩ or higher |
| D53-17 (ALI) - or D89-1 (ALO) - Body ground | ||
| D53-15 (ARI) or D89-2 (ARO) - Body ground | ||
| D53-16 (ASGN) or D89-3 (ASGN) - Body ground |
Reconnect the radio receiver connector.
Reconnect the stereo jack adapter connector.
|
| ||||
| OK | ||
| ||