Home › BRAKE › BRAKE CONTROL › VSC OFF SWITCH (for Hatchback)

VSC OFF SWITCH (for Hatchback) > INSPECTION

for Preparation Click here



1. INSPECT VSC OFF SWITCH


    C215135E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *1
    VSC OFF Switch

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    6 - 9
    Released
    10 kΩ or higher
    6 - 9
    Pushed in
    Below 1 Ω

    If the result is not as specified, replace the VSC OFF switch.

  1. Check illumination operation.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 8
    Battery negative (-) → 7
    Illuminates

    If the result is not as specified, replace the VSC OFF switch.