Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY (for Outer Rear View Mirror)

SIDE TURN SIGNAL LIGHT ASSEMBLY (for Outer Rear View Mirror) > INSTALLATION

for Preparation Click here



1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


E151453
  1. Connect the connector.

  1. Install the side turn signal light with the 3 screws.



2. INSTALL OUTER MIRROR COVER


    B136243
  1. Engage the claw on the lower part of the mirror cover.

  1. Engage the claw on the upper part of the mirror cover.

  1. After installing the outer mirror cover, check that there are no gaps between the cover and the mirror body.

    HINT:
    If there is a gap between the cover and the mirror body, it may cause noise during driving.



3. INSTALL OUTER MIRROR


B136162E02
  1. Engage the claw and install the outer rear view mirror with the 3 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. w/ Power mirror:
    Connect the connector.