Home › STEERING › POWER STEERING › ELECTRONIC POWER STEERING SYSTEM

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0129    Lost Communication with Brake System Control Module

for Preparation Click here


DESCRIPTION

The power steering ECU receives signals from the ECM and the skid control ECU (ABS ECU) via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0100
ECM communication error
  1. CAN communication system
  2. ECM
U0129
Skid control ECU (ABS ECU) communication error
  1. CAN communication system
  2. Skid control ECU (ABS ECU)

HINT:
When two or more DTCs starting with [U] are output simultaneously, inspect the connectors and wire harness of each ECU.


INSPECTION PROCEDURE

1.RECONFIRM DTC OUTPUT
  1. Check for DTCs.

    OK:
    DTCs other than U0100 and U0129 are not output.



NG
GO TO CAN COMMUNICATION SYSTEM
OK

CHECK INTERMITTENT PROBLEMS