ENGINE COMPARTMENT > THREE-DIMENSIONAL DISTANCE


HINT:
  1. In cases in which only one dimension is given, left and right are symmetrical.
  1. For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).


Measuring Point Name 
Symbol
Name
Hole Diameter
mm (in.)
A, a
Front Fender Installation Nut
M6 (0.24)
B, b
Front Spring Support Standard Hole
φ11 (0.43)
C, c
Hood Hinge Installation Nut
M8 (0.31)
D
Cowl Top Inner Panel Center Mark
-
E, e
Front Side Member Standard Hole
φ15 (0.59)
F, f
Front Side Member Standard Hole
φ10 (0.39)
G, g
Radiator Seal Installation Hole
φ8 (0.31)
H, h
Front Bumper Reinforcement Installation Nut
M10 (0.39)
j
Radiator Support Brace Installation Nut
M6 (0.24)
K, k
Front Fender Mounting Bracket Standard Hole
φ10 (0.39)
L, l
Hood Cushion Installation Hole
φ15 (0.59)
M, m
Headlight Installation Hole
9X9 (0.35X0.35)

K101628E01