WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS > WHEEL ALIGNMENT STANDARD



MEASURE VEHICLE HEIGHT (for Europe TMC Made)
C235025E01

Vehicle Height (Unloaded Vehicle) 
Model
Tire Size
Engine
Front A-B
Rear C-D
Except for Rough Road Package
175/70 R14
1KR-FE
95 mm
(3.74 in.)
32 mm
(1.26 in.)
175/65 R15
1KR-FE
95 mm
(3.74 in.)
32 mm
(1.26 in.)
1NR-FE
95 mm
(3.74 in.)
33 mm
(1.30 in.)
175/65 R14
1KR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
185/60 R15
1KR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
1NR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
Rough Road Package
175/65 R14
1KR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)
185/60 R15
1KR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)
1NR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)

Measuring points:
A:
Ground clearance of front wheel center
B:
Ground clearance of front lower arm set front bolt center
C:
Ground clearance of rear wheel center
D:
Ground clearance of axle beam set bolt center

NOTICE:
  1. Before inspecting the wheel alignment, check the vehicle height.
  2. The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

HINT:
Bounce the vehicle up and down at the corners to stabilize the suspension before inspecting the vehicle height.


MEASURE VEHICLE HEIGHT (for Europe TMMF Made)
C235025E01

Vehicle Height (Unloaded Vehicle) 
Model
Tire Size
Engine
Front A-B
Rear C-D
Except for Rough Road Package
175/70 R14
1KR-FE
95 mm
(3.74 in.)
32 mm
(1.26 in.)
1NR-FE
95 mm
(3.74 in.)
33 mm
(1.30 in.)
1ND-TV
97 mm
(3.82 in.)
33 mm
(1.30 in.)
175/65 R15
1KR-FE
95 mm
(3.74 in.)
32 mm
(1.26 in.)
195/50 R16
1NR-FE
100 mm
(3.94 in.)
33 mm
(1.30 in.)
1ND-TV
100 mm
(3.94 in.)
33 mm
(1.30 in.)
Except for Rough Road Package
w/o No Rear Seat
175/65 R14
1KR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
Except for Rough Road Package
w/ No Rear Seat
87 mm
(3.43 in.)
21 mm
(0.83 in.)
Except for Rough Road Package
w/o No Rear Seat
185/60 R15
1KR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
1NR-FE
87 mm
(3.43 in.)
24 mm
(0.94 in.)
1ND-TV
89 mm
(3.50 in.)
25 mm
(0.98 in.)
Except for Rough Road Package
w/ No Rear Seat
1KR-FE
87 mm
(3.43 in.)
21 mm
(0.83 in.)
1NR-FE
87 mm
(3.43 in.)
21 mm
(0.83 in.)
1ND-TV
89 mm
(3.50 in.)
21 mm
(0.83 in.)
Except for Rough Road Package
w/o Panorama Roof
175/65 R15
1NR-FE
95 mm
(3.74 in.)
33 mm
(1.30 in.)
1ND-TV
97 mm
(3.82 in.)
33 mm
(1.30 in.)
Except for Rough Road Package
w/ Panorama Roof
1NR-FE
100 mm
(3.94 in.)
33 mm
(1.30 in.)
1ND-TV
100 mm
(3.94 in.)
33 mm
(1.30 in.)
Rough Road Package
175/65 R14
1KR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)
185/60 R15
1KR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)
1NR-FE
67 mm
(2.64 in.)
4 mm
(0.16 in.)
1ND-TV
69 mm
(2.72 in.)
5 mm
(0.20 in.)

Measuring points:
A:
Ground clearance of front wheel center
B:
Ground clearance of front lower arm set front bolt center
C:
Ground clearance of rear wheel center
D:
Ground clearance of axle beam set bolt center

NOTICE:
  1. Before inspecting the wheel alignment, check the vehicle height.
  2. The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

HINT:
Bounce the vehicle up and down at the corners to stabilize the suspension before inspecting the vehicle height.


MEASURE VEHICLE HEIGHT (except Europe)
C235025E01

Vehicle Height (Unloaded Vehicle) 
Model
Tire Size
Front A-B
Rear C-D
Except for Rough Road Package
175/70 R14
97 mm
(3.82 in.)
32 mm
(1.26 in.)
175/65 R15
97 mm
(3.82 in.)
32 mm
(1.26 in.)
175/65 R14
87 mm
(3.43 in.)
25 mm
(0.98 in.)
185/60 R15
87 mm
(3.43 in.)
24 mm
(0.94 in.)
Rough Road Package
175/65 R14
67 mm
(2.64 in.)
5 mm
(0.20 in.)
185/60 R15
67 mm
(2.64 in.)
4 mm
(0.16 in.)

Measuring points:
A:
Ground clearance of front wheel center
B:
Ground clearance of front lower arm set front bolt center
C:
Ground clearance of rear wheel center
D:
Ground clearance of axle beam set bolt center

NOTICE:
  1. Before inspecting the wheel alignment, check the vehicle height.
  2. The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

HINT:
Bounce the vehicle up and down at the corners to stabilize the suspension before inspecting the vehicle height.


INSPECT WHEEL TURNING ANGLE (for Europe TMC Made)
C132439E12
  1. Fully turn the steering wheel left and right, and measure the wheel turning angle.
    Text in Illustration 
    *a
    Inside
    *b
    Outside
    V100135
    Front of the Vehicle

    Wheel Turning Angle (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Inside Wheel
    Outside Wheel
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    40°46 ' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    175/65 R15
    1KR-FE
    40°46 ' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    1NR-FE
    40°46' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    175/65 R14
    1KR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    185/60 R15
    1KR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    1NR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    Rough Road Package
    175/65 R14
    1KR-FE
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    185/60 R15
    1KR-FE
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    1NR-FE
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    If the right and left inside wheel angles are not within the specified range, check the right and left rack end lengths.


INSPECT WHEEL TURNING ANGLE (for Europe TMMF Made)
C132439E12
  1. Fully turn the steering wheel left and right, and measure the wheel turning angle.
    Text in Illustration 
    *a
    Inside
    *b
    Outside
    V100135
    Front of the Vehicle

    Wheel Turning Angle (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Inside Wheel
    Outside Wheel
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    40°46' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    1NR-FE
    40°46' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08° )
    1ND-TV
    40°45' +/- 2°
    (40.75° +/- 2°)
    35°03'
    (35.05°)
    175/65 R15
    1KR-FE
    40°46' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    195/50 R16
    1NR-FE
    32°27' +/- 2°
    (32.45° +/- 2°)
    29°27'
    (29.45°)
    1ND-TV
    32°27' +/- 2°
    (32.45° +/- 2°)
    29°27'
    (29.45°)
    Except for Rough Road Package
    w/o No Rear Seat
    175/65 R14
    1KR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    Except for Rough Road Package
    w/ No Rear Seat
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    Except for Rough Road Package
    w/o No Rear Seat
    185/60 R15
    1KR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    1NR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    1ND-TV
    40°59' +/- 2°
    (40.98° +/- 2°)
    35°13'
    (35.22°)
    Except for Rough Road Package
    w/ No Rear Seat
    1KR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    1NR-FE
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    1ND-TV
    40°59' +/- 2°
    (40.98° +/- 2°)
    35°13'
    (35.22°)
    Except for Rough Road Package
    w/o Panorama Roof
    175/65 R15
    1NR-FE
    40°46' +/- 2°
    (40.77° +/- 2°)
    35°05'
    (35.08°)
    1ND-TV
    40°45' +/- 2°
    (40.75° +/- 2°)
    35°03'
    (35.05°)
    Except for Rough Road Package
    w/ Panorama Roof
    1NR-FE
    40°39' +/- 2°
    (40.65° +/- 2°)
    34°58'
    (34.97°)
    1ND-TV
    40°39' +/- 2°
    (40.65° +/- 2°)
    34°58'
    (34.97°)
    Rough Road Package
    175/65 R14
    1KR-FE
    41°35 +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    185/60 R15
    1KR-FE
    41°35 +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    1NR-FE
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    1ND-TV
    41°33' +/- 2°
    (41.55° +/- 2°)
    35°41'
    (35.68°)
    If the right and left inside wheel angles are not within the specified range, check the right and left rack end lengths.


INSPECT WHEEL TURNING ANGLE (except Europe)
C132439E12
  1. Fully turn the steering wheel left and right, and measure the wheel turning angle.
    Text in Illustration 
    *a
    Inside
    *b
    Outside
    V100135
    Front of the Vehicle

    Wheel Turning Angle (Unloaded Vehicle) 
    Model
    Tire Size
    Inside Wheel
    Outside Wheel
    Except for Rough Road Package
    175/70 R14
    40°44 ' +/- 2°
    (40.73° +/- 2°)
    35°03'
    (35.05°)
    175/65 R15
    40°44 ' +/- 2°
    (40.73° +/- 2°)
    35°03'
    (35.05°)
    175/65 R14
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    185/60 R15
    41°01' +/- 2°
    (41.02° +/- 2°)
    35°15'
    (35.25°)
    Rough Road Package
    175/65 R14
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    185/60 R15
    41°35' +/- 2°
    (41.58° +/- 2°)
    35°43'
    (35.72°)
    If the right and left inside wheel angles are not within the specified range, check the right and left rack end lengths.


INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION (for Europe TMC Made)
C132440E17
  1. Put the front wheel on the center of the alignment tester.
    Text in Illustration 
    *1
    Alignment tester
    *2
    Camber-caster-steering axis inclination gauge

  2. Remove the wheel cap.

  3. Set the camber-caster-steering axis inclination gauge at the center of the axle hub or drive shaft.

  4. Inspect the camber, caster and steering axis inclination.

    Camber Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Camber
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    175/65 R15
    1KR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    1NR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    175/65 R14
    1KR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    185/60 R15
    1KR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    1NR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    Rough Road Package
    175/65 R14
    1KR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    185/60 R15
    1KR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    1NR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)

    Caster Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Caster
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    5°03' +/- 45'
    (5.05° +/- 0.75°)
    175/65 R15
    1KR-FE
    5°03' +/- 45'
    (5.05° +/- 0.75°)
    1NR-FE
    5°01' +/- 45'
    (5.02° +/- 0.75°)
    175/65 R14
    1KR-FE
    4°54' +/- 45'
    (4.90° +/- 0.75°)
    185/60 R15
    1KR-FE
    4°55' +/- 45'
    (4.92° +/- 0.75°)
    1NR-FE
    4°54' +/- 45'
    (4.90° +/- 0.75°)
    Rough Road Package
    175/65 R14
    1KR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    185/60 R15
    1KR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    1NR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)

    Steering Axis Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Steering Axis Inclination
    (Reference)
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    11°19'
    (11.32°)
    175/65 R15
    1KR-FE
    11°19'
    (11.32°)
    1NR-FE
    11°19'
    (11.32°)
    175/65 R14
    1KR-FE
    11°09'
    (11.15°)
    185/60 R15
    1KR-FE
    11°09'
    (11.15°)
    1NR-FE
    11°09'
    (11.15°)
    Rough Road Package
    175/65 R14
    1KR-FE
    10°40'
    (10.67°)
    185/60 R15
    1KR-FE
    10°40'
    (10.67°)
    1NR-FE
    10°40'
    (10.67°)

    NOTICE:
    1. Perform the inspection while the vehicle is empty (without a spare tire or tools on board).
    2. The tolerance for the difference between the left and right wheels is 30' (0.5°) or less for both the camber and caster.

  5. Remove the camber-caster-steering axis inclination gauge and attachment.

  6. Install the wheel cap.
    If the caster and steering axis inclination are not within the specified values after the camber has been correctly adjusted, recheck the suspension parts for damage and wear.


INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION (for Europe TMMF Made)
C132440E17
  1. Put the front wheel on the center of the alignment tester.
    Text in Illustration 
    *1
    Alignment tester
    *2
    Camber-caster-steering axis inclination gauge

  2. Remove the wheel cap.

  3. Set the camber-caster-steering axis inclination gauge at the center of the axle hub or drive shaft.

  4. Inspect the camber, caster and steering axis inclination.

    Camber Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Camber
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    1NR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    1ND-TV
    -0°21' +/- 45'
    (-0.35° +/- 0.75°)
    175/65 R15
    1KR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    195/50 R16
    1NR-FE
    -0°23' +/- 45'
    (-0.38° +/- 0.75°)
    1ND-TV
    -0°23' +/- 45'
    (-0.38° +/- 0.75°)
    Except for Rough Road Package
    w/o No Rear Seat
    175/65 R14
    1KR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    Except for Rough Road Package
    w/ No Rear Seat
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    Except for Rough Road Package
    w/o No Rear Seat
    185/60 R15
    1KR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    1NR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    1ND-TV
    -0°16' +/- 45'
    (-0.27° +/- 0.75°)
    Except for Rough Road Package
    w/ No Rear Seat
    1KR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    1NR-FE
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    1ND-TV
    -0°16' +/- 45'
    (-0.27° +/- 0.75°)
    Except for Rough Road Package
    w/o Panorama Roof
    175/65 R15
    1NR-FE
    -0°20' +/- 45'
    (-0.33° +/- 0.75°)
    1ND-TV
    -0°21' +/- 45'
    (-0.35° +/- 0.75°)
    Except for Rough Road Package
    w/ Panorama Roof
    1NR-FE
    -0°23' +/- 45'
    (-0.38° +/- 0.75°)
    1ND-TV
    -0°23' +/- 45'
    (-0.38° +/- 0.75°)
    Rough Road Package
    175/65 R14
    1KR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    185/60 R15
    1KR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    1NR-FE
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    1ND-TV
    0°01' +/- 45'
    (0.02° +/- 0.75°)

    Caster Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Caster
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    5°03' +/- 45'
    (5.05° +/- 0.75°)
    1NR-FE
    5°01' +/- 45'
    (5.02° +/- 0.75°)
    1ND-TV
    5°00' +/- 45'
    (5.00° +/- 0.75°)
    175/65 R15
    1KR-FE
    5°03' +/- 45'
    (5.05° +/- 0.75°)
    195/50 R16
    1NR-FE
    5°00' +/- 45'
    (5.00° +/- 0.75°)
    1ND-TV
    4°59' +/- 45'
    (4.98° +/- 0.75°)
    Except for Rough Road Package
    w/o No Rear Seat
    175/65 R14
    1KR-FE
    4°54' +/- 45'
    (4.90° +/- 0.75°)
    Except for Rough Road Package
    w/ No Rear Seat
    4°48' +/- 45'
    (4.80° +/- 0.75°)
    Except for Rough Road Package
    w/o No Rear Seat
    185/60 R15
    1KR-FE
    4°55' +/- 45'
    (4.92° +/- 0.75°)
    1NR-FE
    4°54' +/- 45'
    (4.90° +/- 0.75°)
    1ND-TV
    4°52' +/- 45'
    (4.87° +/- 0.75°)
    Except for Rough Road Package
    w/ No Rear Seat
    1KR-FE
    4°49' +/- 45'
    (4.82° +/- 0.75°)
    1NR-FE
    4°48' +/- 45'
    (4.80° +/- 0.75°)
    1ND-TV
    4°46' +/- 45'
    (4.77° +/- 0.75°)
    Except for Rough Road Package
    w/o Panorama Roof
    175/65 R15
    1NR-FE
    5°01' +/- 45'
    (5.02° +/- 0.75°)
    1ND-TV
    5°00' +/- 45'
    (5.00° +/- 0.75°)
    Except for Rough Road Package
    w/ Panorama Roof
    1NR-FE
    5°00' +/- 45'
    (5.00° +/- 0.75°)
    1ND-TV
    4°59' +/- 45'
    (4.98° +/- 0.75°)
    Rough Road Package
    175/65 R14
    1KR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    185/60 R15
    1KR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    1NR-FE
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    1ND-TV
    4°32' +/- 45'
    (4.53° +/- 0.75°)

    Steering Axis Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Steering Axis Inclination
    (Reference)
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    11°19'
    (11.32°)
    1NR-FE
    11°19'
    (11.32°)
    1ND-TV
    11°21'
    (11.35°)
    175/65 R15
    1KR-FE
    11°19'
    (11.32°)
    195/50 R16
    1NR-FE
    11°25'
    (11.42°)
    1ND-TV
    11°25'
    (11.42°)
    Except for Rough Road Package
    w/o No Rear Seat
    175/65 R14
    1KR-FE
    11°09'
    (11.15°)
    Except for Rough Road Package
    w/ No Rear Seat
    11°09'
    (11.15°)
    Except for Rough Road Package
    w/o No Rear Seat
    185/60 R15
    1KR-FE
    11°09'
    (11.15°)
    1NR-FE
    11°09'
    (11.15°)
    1ND-TV
    11°11'
    (11.18°)
    Except for Rough Road Package
    w/ No Rear Seat
    1KR-FE
    11°09'
    (11.15°)
    1NR-FE
    11°09'
    (11.15°)
    1ND-TV
    11°11'
    (11.18°)
    Except for Rough Road Package
    w/o Panorama Roof
    175/65 R15
    1NR-FE
    11°19'
    (11.32°)
    1ND-TV
    11°21'
    (11.35°)
    Except for Rough Road Package
    w/ Panorama Roof
    1NR-FE
    11°25'
    (11.42°)
    1ND-TV
    11°25'
    (11.42°)
    Rough Road Package
    175/65 R14
    1KR-FE
    10°40'
    (10.67°)
    185/60 R15
    1KR-FE
    10°40'
    (10.67°)
    1NR-FE
    10°40'
    (10.67°)
    1ND-TV
    10°42'
    (10.70°)

    NOTICE:
    1. Perform the inspection while the vehicle is empty (without a spare tire or tools on board).
    2. The tolerance for the difference between the left and right wheels is 30' (0.5°) or less for both the camber and caster.

  5. Remove the camber-caster-steering axis inclination gauge and attachment.

  6. Install the wheel cap.
    If the caster and steering axis inclination are not within the specified values after the camber has been correctly adjusted, recheck the suspension parts for damage and wear.


INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION (except Europe)
C132440E17
  1. Put the front wheel on the center of the alignment tester.
    Text in Illustration 
    *1
    Alignment tester
    *2
    Camber-caster-steering axis inclination gauge

  2. Remove the wheel cap.

  3. Set the camber-caster-steering axis inclination gauge at the center of the axle hub or drive shaft.

  4. Inspect the camber, caster and steering axis inclination.

    Camber Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Camber
    Except for Rough Road Package
    175/70 R14
    -0°21' +/- 45'
    (-0.35° +/- 0.75°)
    175/65 R15
    -0°21' +/- 45'
    (-0.35° +/- 0.75°)
    175/65 R14
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    185/60 R15
    -0°15' +/- 45'
    (-0.25° +/- 0.75°)
    Rough Road Package
    175/65 R14
    0°02' +/- 45'
    (0.03° +/- 0.75°)
    185/60 R15
    0°02' +/- 45'
    (0.03° +/- 0.75°)

    Caster Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Transmission
    Caster
    Except for Rough Road Package
    175/70 R14
    C54
    U441E
    4°59' +/- 45'
    (4.98° +/- 0.75°)
    175/65 R15
    C54
    U340E
    U441E
    4°60' +/- 45'
    (5.00° +/- 0.75°)
    175/65 R14
    C54
    4°53' +/- 45'
    (4.88° +/- 0.75°)
    U441E
    4°52' +/- 45'
    (4.87° +/- 0.75°)
    185/60 R15
    C54
    4°54' +/- 45'
    (4.90° +/- 0.75°)
    U340E
    U441E
    4°53' +/- 45'
    (4.88° +/- 0.75°)
    Rough Road Package
    175/65 R14
    C54
    4°34' +/- 45'
    (4.57° +/- 0.75°)
    U441E
    4°33' +/- 45'
    (4.55° +/- 0.75°)
    185/60 R15
    C54
    4°35' +/- 45'
    (4.58° +/- 0.75°)
    U340E
    U441E
    4°34' +/- 45'
    (4.57° +/- 0.75°)

    Steering Axis Inclination (Unloaded Vehicle) 
    Model
    Tire Size
    Steering Axis Inclination
    (Reference)
    Except for Rough Road Package
    175/70 R14
    11°21'
    (11.35°)
    175/65 R15
    11°21'
    (11.35°)
    175/65 R14
    11°09'
    (11.15°)
    185/60 R15
    11°09'
    (11.15°)
    Rough Road Package
    175/65 R14
    10°40'
    (10.67°)
    185/60 R15
    10°40'
    (10.67°)

    NOTICE:
    1. Perform the inspection while the vehicle is empty (without a spare tire or tools on board).
    2. The tolerance for the difference between the left and right wheels is 30' (0.5°) or less for both the camber and caster.

  5. Remove the camber-caster-steering axis inclination gauge and attachment.

  6. Install the wheel cap.
    If the caster and steering axis inclination are not within the specified values after the camber has been correctly adjusted, recheck the suspension parts for damage and wear.


INSPECT TOE-IN (for Europe TMC Made)
  1. Bounce the vehicle up and down at the corners to stabilize the suspension.

  2. Release the parking brake and move the shift lever to the neutral position.

  3. Push the vehicle straight ahead approximately 5 m (16.4 ft.). (Step A)



  4. C241642E01
  5. Put tread center marks on the rearmost points of the front wheels and measure the distance between the marks (Dimension B).
    Text in Illustration 
    *a
    Tread Center Mark

  6. Slowly push the vehicle straight ahead to cause the front wheels to rotate 180° using the front tire valve as a reference point.

    HINT:
    Do not allow the wheels to rotate more than 180°. If the wheels rotate more than 180°, perform the procedure from (Step A) again.



  7. C241643E01
  8. Measure the distance between the tread center marks on the front side of the wheels (Dimension A).
    Text in Illustration 
    V100135
    Front of the Vehicle

    Toe-in (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Specified Condition
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    175/65 R15
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    175/65 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    185/60 R15
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    Rough Road Package
    175/65 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    185/60 R15
    1KR-FE
    B-A: 1.4 +/- 2.0 mm
    (0.0551 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.4 +/- 2.0 mm
    (0.0551 +/- 0.0787 in.)
    If the toe-in is not within the specified value, adjust it at the rack ends.


INSPECT TOE-IN (for Europe TMMF Made)
  1. Bounce the vehicle up and down at the corners to stabilize the suspension.

  2. Release the parking brake and move the shift lever to the neutral position.

  3. Push the vehicle straight ahead approximately 5 m (16.4 ft.). (Step A)



  4. C241642E01
  5. Put tread center marks on the rearmost points of the front wheels and measure the distance between the marks (Dimension B).
    Text in Illustration 
    *a
    Tread Center Mark

  6. Slowly push the vehicle straight ahead to cause the front wheels to rotate 180° using the front tire valve as a reference point.

    HINT:
    Do not allow the wheels to rotate more than 180°. If the wheels rotate more than 180°, perform the procedure from (Step A) again.



  7. C241643E01
  8. Measure the distance between the tread center marks on the front side of the wheels (Dimension A).
    Text in Illustration 
    V100135
    Front of the Vehicle

    Toe-in (Unloaded Vehicle) 
    Model
    Tire Size
    Engine
    Specified Condition
    Except for Rough Road Package
    175/70 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    175/65 R15
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    195/50 R16
    1NR-FE
    B-A: 1.0 +/- 2.0 mm
    (0.0393 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.0 +/- 2.0 mm
    (0.0393 +/- 0.0787 in.)
    Except for Rough Road Package
    w/o No Rear Seat
    175/65 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    Except for Rough Road Package
    w/ No Rear Seat
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    Except for Rough Road Package
    w/o No Rear Seat
    185/60 R15
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    Except for Rough Road Package
    w/ No Rear Seat
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    Except for Rough Road Package
    w/o Panorama Roof
    175/65 R15
    1NR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    Except for Rough Road Package
    w/ Panorama Roof
    1NR-FE
    B-A: 1.0 +/- 2.0 mm
    (0.0393 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.0 +/- 2.0 mm
    (0.0393 +/- 0.0787 in.)
    Rough Road Package
    175/65 R14
    1KR-FE
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    185/60 R15
    1KR-FE
    B-A: 1.4 +/- 2.0 mm
    (0.0551 +/- 0.0787 in.)
    1NR-FE
    B-A: 1.4 +/- 2.0 mm
    (0.0551 +/- 0.0787 in.)
    1ND-TV
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    If the toe-in is not within the specified value, adjust it at the rack ends.


INSPECT TOE-IN (except Europe)
  1. Bounce the vehicle up and down at the corners to stabilize the suspension.

  2. Release the parking brake and move the shift lever to the neutral position.

  3. Push the vehicle straight ahead approximately 5 m (16.4 ft.). (Step A)



  4. C241642E01
  5. Put tread center marks on the rearmost points of the front wheels and measure the distance between the marks (Dimension B).
    Text in Illustration 
    *a
    Tread Center Mark

  6. Slowly push the vehicle straight ahead to cause the front wheels to rotate 180° using the front tire valve as a reference point.

    HINT:
    Do not allow the wheels to rotate more than 180°. If the wheels rotate more than 180°, perform the procedure from (Step A) again.



  7. C241643E01
  8. Measure the distance between the tread center marks on the front side of the wheels (Dimension A).
    Text in Illustration 
    V100135
    Front of the Vehicle

    Toe-in (Unloaded Vehicle) 
    Model
    Tire Size
    Specified Condition
    Except for Rough Road Package
    175/70 R14
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    175/65 R15
    B-A: 1.2 +/- 2.0 mm
    (0.0472 +/- 0.0787 in.)
    175/65 R14
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    185/60 R15
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    Rough Road Package
    175/65 R14
    B-A: 1.3 +/- 2.0 mm
    (0.0512 +/- 0.0787 in.)
    185/60 R15
    B-A: 1.4 +/- 2.0 mm
    (0.0551 +/- 0.0787 in.)
    If the toe-in is not within the specified value, adjust it at the rack ends.