FRONT FENDER MOUNTING BRACKET > ASSEMBLY REPLACEMENT


K100641

REMOVAL

Symbol meaning
K100016
Remove Weld Points

K101485E01


INSTALLATION

Symbol meaning
K100021
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101485E02