ROCKER OUTER PANEL (for 5 Door) > CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)


K100691

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100023
Cut and Join Location
K100024
Cut Location for Supply Parts

K101587E01


K101588E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100027
Butt Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101589E01


K101590E01