AUTOMATIC TRANSAXLE SYSTEM > GENERAL |
| OUTLINE |
The U340E 4-speed Super Electronically Controlled Transaxle (Super ECT) is used on the models with 1NZ-FE engine.
A gate type shift lever is used.
A shift lock system is used.
| SPECIFICATION |
Automatic Transaxle Assembly
| Gear Ratio | 1st | 2.847 |
| 2nd | 1.552 | |
| 3rd | 1.000 | |
| 4th | 0.700 | |
| Reverse | 2.343 | |
| Differential Gear Ratio*1 | 4.237 | |
| Fluid Capacity*2 | 6.4 Liters (6.8 US qts, 5.6 Imp. qts) | |
| Fluid Type | TOYOTA Genuine ATF WS | |
| Weight (Reference)*3 | 68.5 kg (150.7 lb) | |
Friction Engagement Components and 1-way Clutch
| C1 | Forward Clutch | No. of Discs | 4 |
| C2 | Direct Clutch | 3 | |
| C3 | Reverse Clutch | 2 | |
| B1 | OD and 2nd Brake | 2 | |
| B2 | 2nd Brake | 3 | |
| B3 | 1st and Reverse Brake | 4 | |
| F1 | No. 1 1-way Clutch | No. of Sprags | 16 |
| F2 | No. 2 1-way Clutch | No. of Rollers | 15 |
Planetary Gear and Counter Gear
| Front Planetary Gear Assembly | No. of Sun Gear Teeth | 46 |
| No. of Pinion Gear Teeth | 21 | |
| No. of Ring Gear Teeth | 85 | |
| Rear Planetary Gear Assembly | No. of Sun Gear Teeth | 32 |
| No. of Pinion Gear Teeth | 21 | |
| No. of Ring Gear Teeth | 75 | |
| Counter Drive Gear | No. of Drive Gear Teeth | 52 |
| Counter Driven Gear | No. of Driven Gear Teeth | 53 |
Torque Converter Assembly
| Torque Converter Type | 3-element, 1-step, 2-phase (With Lock-up Mechanism) |
| Stall Torque Ratio | 1.95 |