AUTOMATIC TRANSAXLE SYSTEM > GENERAL



OUTLINE
  1. The U441E 4-speed Super Electronically Controlled Transaxle (Super ECT) is used on the models with 2NZ-FE engine.

  2. A gate type shift lever is used.

  3. A shift lock system is used.


SPECIFICATION
  1. Automatic Transaxle Assembly

    Gear Ratio
    1st
    2.875
    2nd
    1.568
    3rd
    1.000
    4th
    0.696
    Reverse
    2.300
    Differential Gear Ratio*1
    4.375
    Fluid Capacity*2
    5.6 Liters (5.9 US qts, 4.9 Imp. qts)
    Fluid Type
    TOYOTA Genuine ATF Type T-IV
    Weight (Reference) *3
    56.3 kg (123.8 lb)

    HINT:
    *1: Counter gear ratio included.
    *2: Differential included.
    *3: The weight shown is the weight of the part fully filled with fluid.

  2. Friction Engagement Components and 1-way Clutch

    C1
    Forward Clutch
    No. of Discs
    4
    C2
    Direct Clutch
    2
    C3
    Reverse Clutch
    2
    B1
    OD and 2nd Brake
    2
    B2
    2nd Brake
    2
    B3
    1st and Reverse Brake
    4
    F1
    No. 1 1-way Clutch
    No. of Sprags
    12
    F2
    No. 2 1-way Clutch
    No. of Rollers
    15

  3. Planetary Gear and Counter Gear

    Planetary Gear
    No. of Planetary Sun Gear Teeth
    24
    No. of Rear Planetary Sun Gear Teeth
    30
    No. of Long Pinion Gear Teeth
    20
    No. of Short Pinion Gear Teeth
    19
    No. of Planetary Ring Gear Teeth
    69
    Counter Gear
    No. of Counter Drive Gear Teeth
    44
    No. of Counter Driven Gear Teeth
    45

  4. Torque Converter Assembly

    Torque Converter Type
    3-element, 1-step, 2-phase (With Lock-up Mechanism)
    Stall Torque Ratio
    2.0