LIGHTING SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. Automatic Light Control System

    Component
    Function
    Main Body ECU (Multiplex Network Body ECU)
    Receives various signals and illuminates the headlights, taillights, clearance lights and license plate lights.
    Headlight Dimmer Switch Assembly
    Light Control Switch
    Transmits an AUTO position signal to the main body ECU (multiplex network body ECU).
    Automatic Light Control Sensor
    Detects the ambient light level.

  2. Light Automatic Turn-off System

    Component
    Function
    Main Body ECU (Multiplex Network Body ECU)
    Receives various signals, and turns off the exterior lights.
    Front Door Courtesy Light Switch Assembly (for Driver)
    Detects whether driver's door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU).
    Headlight Dimmer Switch Assembly
    Light Control Switch
    Transmits a light control position signal to the main body ECU (multiplex network body ECU).

  3. Light Reminder System

    Component
    Function
    Main Body ECU (Multiplex Network Body ECU)
    Outputs taillight illumination signals and driver's door open signals to the combination meter assembly.
    Front Door Courtesy Light Switch Assembly (for Driver)
    Detects whether driver's door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU).
    Combination Meter Assembly
    Receives taillight illumination signals and driver's door open signals from the main body ECU (multiplex network body ECU) when the ignition switch is turned off, and sounds the buzzer.


FUNCTION
  1. Light Automatic Turn-off System

    1. The main body ECU (multiplex network body ECU) receives the light control switch signals, front door courtesy light switch assembly (driver side) on/off signal and ignition switch turned off signal, and turns off the exterior lights.

      Light Control Switch Position
      Outline
      TAIL, HEAD, AUTO
      While the lights (headlights, front fog lights and taillights) are turned on, this system automatically turns them off when the ignition switch is turned off and the driver's door is opened.

    2. After the light automatic turn-off system was activated, when the ignition switch is shifted from ON to off while the light control switch (TAIL or HEAD) is turned on, the battery saving function turns off the headlights and taillights automatically in approximately 20 minutes. In addition, when one of the doors is opened from the closed status or closed from the opened status, the accumulated time is reset and the lights turn off in approximately 20 minutes after the door was opened/closed.

    3. The light automatic turn-off system is controlled by the main body ECU (multiplex network body ECU).

  2. Light Reminder System

    1. The light reminder system warns the driver using a buzzer when the meter ECU inside the combination meter assembly receives the driver's door courtesy light switch signal via the main body ECU (multiplex network body ECU) and the ignition switch is turned off and the door is opened with the taillights kept on. The buzzer is located inside the combination meter assembly.

      Light Control Switch Position
      Ignition Switch
      Door
      Buzzer
      TAIL, HEAD
      Switch off
      Open
      Sounds
      Closed
      -