METER / GAUGE SYSTEM > GENERAL |
| OUTLINE |
An analog display type combination meter, with or without a tachometer, is used.
A multi-information display whose display items can be changed by pressing the ODO/TRIP DISP switch and shift position indicator lights are provided in the Liquid Crystal Display (LCD) on the center section of the combination meter.
A meter ECU and buzzer are enclosed in the combination meter assembly. This meter ECU maintains communication with other ECUs through the CAN.
A dimming mode display function has been provided. In order to adjust the combination meter luminance, the illumination brightness level is indicated on the multi-information display.
Eco Driving Indicator Light informs the driver of whether the acceleration is Eco-friendly or not.

| *A | Models with Automatic Transaxle | - | - |
| *1 | Speedometer | *2 | Clock Set Switch |
| *3 | Eco Driving Indicator Light | *4 | Multi-information Display |
| *5 | ODO/TRIP DISP Switch | - | - |

| *A | Models with Automatic Transaxle | - | - |
| *1 | Speedometer | *2 | Tachometer |
| *3 | Eco Driving Indicator Light | *4 | Clock Set Switch |
| *5 | Multi-information Display | *6 | ODO/TRIP DISP Switch |
| *7 | Fuel Gauge | - | - |