BRAKE SYSTEM > GENERAL



OUTLINE
  1. A tandem type master cylinder is used.

  2. A single diaphragm type brake booster is used.

  3. A brake assist mechanism is integrated in the brake booster on models with ABS with EBD.


SPECIFICATION

Item
Specification
Master Cylinder
Type
Tandem (Plunger)
Diameter
20.64 mm (0.81 in.)
Manufacturer
ADVICS
Brake Booster
Type
Single Diaphragm, Tie rod Type
Size
9 in.
Manufacturer
ADVICS

MAIN FEATURES
  1. The mechanical type brake assist uses the brake assist mechanism in the brake booster to mechanically activate the brake booster function in order to increase the brake force.



  2. The primary purpose of the brake assist is to provide an auxiliary brake force to assist the driver who cannot generate a large brake force during emergency braking, thus helping draw the vehicle's brake performance.


    X105977E02