With no braking condition, the air valve closes, the control valve opens, and the pressure is the same in the variable pressure chamber and the constant pressure chamber.
Text in Illustration
*1
| Constant Pressure Chamber
| *2
| Variable Pressure Chamber
|
*a
| Air Valve "Close"
| *b
| Control Valve "Open"
|
During normal braking, the air valve opens and the control valve closes to activate the brake booster function.
Text in Illustration
*1
| Constant Pressure Chamber
| *2
| Variable Pressure Chamber
|
*3
| Operation Rod
| *4
| Power Piston
|
*a
| Air Valve "Open"
| -
| -
|

| Push
| 
| Move
|
When the operation rod speed is faster than the power piston speed, the air valve pushes the slide valve hook. Consequently, the slide valve separates from the slide valve hook, the spring pushes the control valve, and the control valve closes. Thus, the opening of the air valve becomes enlarged and the air volume that is introduced increases. This results in a brake assist force which strongly pushes the power piston.
Text in Illustration
*1
| Constant Pressure Chamber
| *2
| Variable Pressure Chamber
|
*3
| Operation Rod
| *4
| Power Piston
|
*5
| Air Valve
| *6
| Slide Valve Hook
|
*7
| Slide Valve
| -
| -
|
*a
| Air Valve "Open"
| *b
| Air Valve "Wide Open"
|

| Push
| 
| Move
|

| More Move
| -
| -
|