Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE

REAR BRAKE FLEXIBLE HOSE > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.



3. REMOVE REAR FLEXIBLE HOSE


    C235495
  1. Using a union nut wrench 10 mm, disconnect the 2 brake tubes while holding the rear flexible hose with a wrench.

    NOTICE:
    1. Do not kink or damage the brake line.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake line.

  1. Remove the 2 clips and rear flexible hose.