CURTAIN SHIELD AIRBAG ASSEMBLY (for 5 Door) > ON-VEHICLE INSPECTION |
| 1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here).

With the curtain shield airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front pillar garnish or roof headlining with a new one:
| 2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed) |
![]() |
Perform a diagnostic system check (Click here).
With the curtain shield airbag removed from the vehicle, if there are any defects, such as those mentioned below, replace the curtain shield airbag with a new one: