Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
A74-20 (BATT) - B84-104 (E1)
| Y - W-B
| Battery (for measuring battery voltage and for ECM memory)
| Always
| 11 to 14 V
|
A74-2 (+B) - B84-104 (E1)
| B - W-B
| Power source of ECM
| Ignition switch ON
| 11 to 14 V
|
A74-1 (+B2) - B84-104 (E1)
| B - W-B
| Power source of ECM
| Ignition switch ON
| 11 to 14 V
|
A74-3 (+BM) - B84-43 (ME01)
| GR - BR
| Power source of throttle actuator
| Always
| 11 to 14 V
|
B84-85 (IGT1) - B84-104 (E1)
| W - W-B
| No. 1 ignition coil (ignition signal)
| Idling
| Pulse generation (See waveform 1)
|
B84-84 (IGT2) - B84-104 (E1)
| V - W-B
|
B84-83 (IGT3) - B84-104 (E1)
| G - W-B
|
B84-82 (IGT4) - B84-104 (E1)
| LG - W-B
|
B84-81 (IGF1) - B84-104 (E1)
| Y - W-B
| No. 1 ignition coil (ignition confirmation signal)
| Ignition switch ON
| 4.5 to 5.5 V
|
Idling
| Pulse generation (See waveform 1)
|
B84-122 (NE+) - B84-121 (NE-)
| L - P
| Crankshaft position sensor
| Idling with warm engine
| Pulse generation (See waveform 2)
|
B84-99 (VV1+) - B84-121 (NE-)
| W - P
| Camshaft position sensor
| Idling with warm engine
| Pulse generation (See waveform 2)
|
B84-108 (#10) - B84-45 (E01)
| B - BR
| Fuel injector assembly
| Ignition switch ON
| 11 to 14 V
|
B84-107 (#20) - B84-45 (E01)
| GR - BR
|
B84-106 (#30) - B84-45 (E01)
| P - BR
| Idling
| Pulse generation (See waveform 3)
|
B84-105 (#40) - B84-45 (E01)
| L - BR
|
B84-109 (HT1A) - B84-86 (E03)
| G - W-B
| Heated oxygen sensor (sensor 1) heater
| Ignition switch ON
| 11 to 14 V
|
B84-112 (OX1A) - B84-90 (EX1A)
| B - V
| Heated oxygen sensor (sensor 1)
| Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor
| Pulse generation (See waveform 4)
|
B84-47 (HT1B) - B84-86 (E03)
| L - W-B
| Heated oxygen sensor (sensor 2) heater
| Ignition switch ON
| 11 to 14 V
|
B84-64 (OX1B) - B84-87 (EX1B)
| B - GR
| Heated oxygen sensor (sensor 2)
| Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor
| Pulse generation (See waveform 5)
|
B84-110 (KNK1) - B84-111 (EKNK)
| R - G
| Knock sensor
| Engine speed maintained at 4000 rpm after warming up engine
| Pulse generation (See waveform 6)
|
A74-8 (SPD) - B84-104 (E1)
| V - W-B
| Speed signal from combination meter assembly
| Driving at 20 km/h (12 mph)
| Pulse generation (See waveform 7)
|
B84-97 (THW) - B84-96 (ETHW)
| V - BR
| Engine coolant temperature sensor
| Idling, Engine coolant temperature 80°C (176°F)
| 0.2 to 1.0 V
|
B84-65 (THA) - B84-88 (ETHA)
| P - G
| Intake air temperature sensor
| Idling, Intake air temperature 20°C (68°F)
| 1.5 to 3.0 V
|
B84-118 (VG) - B84-116 (E2G)
| GR - L
| Mass air flow meter
| Idling, Shift lever position neutral, A/C switch OFF
| 0.5 to 3.0 V
|
A74-24 (W) - B84-104 (E1)
| B - W-B
| MIL
| Ignition switch to ON (MIL goes on)
| Below 1.5 V
|
Idling
| 11 to 14 V
|
A74-48 (STA) - B84-104 (E1)
| BR - W-B
| Starter signal
| Cranking
| 5.5 V or more
|
B84-52 (NSW) - A84-104 (E1)
| BE - W-B
| Clutch start switch signal*1 Park/neutral position switch signal*2
| Ignition switch ON (clutch pedal depressed)*1
| Below 1.5 V
|
Ignition switch ON (clutch pedal released)*1
| 11 to 14 V
|
Ignition switch ON (shift lever in P, N)*2
| Below 1.5 V
|
Ignition switch ON (shift lever not in P, N)*2
| 11 to 14 V
|
Cranking
| 6 to 13 V
|
B84-115 (VTA1) - B84-91 (ETA)
| Y - V
| Throttle position sensor (for engine control)
| Ignition switch ON, Throttle valve fully closed
| 0.5 to 1.1 V
|
Ignition switch ON, Throttle valve fully open
| 3.2 to 4.8 V
|
B84-114 (VTA2) - B84-91 (ETA)
| GR - V
| Throttle position sensor (for sensor malfunction detection)
| Ignition switch ON, Throttle valve fully closed
| 2.1 to 3.1 V
|
Ignition switch ON, Throttle valve fully open
| 4.6 to 5.0 V
|
B84-67 (VCTA) - B84-91 (ETA)
| W - V
| Power source of sensor (specific voltage)
| Ignition switch ON
| 4.5 to 5.5 V
|
A74-57 (VCPA) - A74-59 (EPA)
| G - V
| Power source of accelerator pedal position sensor (for VPA)
| Ignition switch ON
| 4.5 to 5.5 V
|
A74-55 (VPA) - A74-59 (EPA)
| R - V
| Accelerator pedal position sensor (for engine control)
| Ignition switch ON, Accelerator pedal released
| 0.5 to 1.1 V
|
Ignition switch ON, Accelerator pedal fully depressed
| 2.6 to 4.5 V
|
A74-56 (VPA2) - A74-60 (EPA2)
| L - B
| Accelerator pedal position sensor (for sensor malfunctioning detection)
| Ignition switch ON, Accelerator pedal released
| 1.2 to 2.0 V
|
Ignition switch ON, Accelerator pedal fully depressed
| 3.4 to 4.7 V
|
A74-58 (VCP2) - A74-60 (EPA2)
| W - B
| Power source of accelerator pedal position sensor (for VPA2)
| Ignition switch ON
| 4.5 to 5.5 V
|
B84-42 (M+) - B84-43 (ME01)
| G - BR
| Throttle actuator
| Idling with warm engine
| Pulse generation (See waveform 8)
|
B84-41 (M-) - B84-43 (ME01)
| BR - BR
| Throttle actuator
| Idling with warm engine
| Pulse generation (See waveform 9)
|
A74-36 (STP) - B84-104 (E1)
| LG - W-B
| Stop light switch assembly
| Brake pedal depressed
| 11 to 14 V
|
Brake pedal released
| Below 1.5 V
|
A74-35 (ST1-) - B84-104 (E1)
| Y - W-B
| Stop light switch assembly (opposite to STP terminal)
| Ignition switch ON, Brake pedal depressed
| Below 1.5 V
|
Ignition switch ON, Brake pedal released
| 11 to 14 V
|
B84-49 (PRG) - B84-45 (E01)
| L - BR
| Purge VSV
| Ignition switch ON
| 11 to 14 V
|
Idling, under purge control
| Pulse generation (See waveform 10)
|
A74-7 (FC) - B84-45 (E01)
| V - BR
| Fuel pump control
| Ignition switch ON
| 11 to 14 V
|
Idling
| Below 1.5 V
|
A74-15 (TACH) - B84-104 (E1)
| LG - W-B
| Engine speed
| Idling
| Pulse generation (See waveform 11)
|
A74-27 (TC) - B84-104 (E1)
| L - W-B
| Terminal TC of DLC 3
| Ignition switch ON
| 11 to 14 V
|
B84-100 (OC1+) - B84-123 (OC1-)
| BR - Y
| Camshaft timing oil control valve assembly (OCV)
| Idling
| Pulse generation (See waveform 12)
|
A74-41 (CANH) - B84-104 (E1)
| L - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 13)
|
A74-49 (CANL) - B84-104 (E1)
| W - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 14)
|
A74-31 (ELS1) - B84-104 (E1)
| R - W-B
| Electric load
| Tail light switch on
| 7.5 to 14 V
|
Tail light switch off
| Below 1.5 V
|
A74-33 (ELS2) - B84-104 (E1)
| G - W-B
| Electric load
| Defogger switch on
| 7.5 to 14 V
|
Defogger switch off
| Below 1.5 V
|
A74-21 (FANL) - B84-104 (E1)
| R - W-B
| Cooling fan relay
| Ignition switch ON Cooling fan not operated
| 11 to 14 V
|
Idling with A/C ON or High engine coolant temperature Cooling fan operated
| Below 1.5 V
|
A74-22 (FANH) - B84-104 (E1)
| G - W-B
| Cooling fan relay No. 2
| Idling with high engine coolant temperature Cooling fan operated at high speed
| Below 1.5 V
|
B84-50 (ALT) - B84-104 (E1)
| G - W-B
| Generator assembly
| Ignition switch ON
| 11 to 14 V
|
A74-28 (IGSW) - B84-104 (E1)
| R - W-B
| Ignition switch assembly
| Ignition switch ON
| 11 to 14 V
|
A74-44 (MREL) - B84-104 (E1)
| GR - W-B
| EFI relay
| Ignition switch ON
| 11 to 14 V
|