FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
Disconnect the fuel sender gauge connector.
![]() |
Release the lock by sliding the fuel sender gauge upward, as shown in the illustration.
| 2. REMOVE FUEL PUMP HARNESS |
![]() |
Disconnect the 2 connectors and remove the fuel pump harness.
| 3. REMOVE FUEL PUMP FILTER |
![]() |
Disengage the 3 claws and remove the fuel pump.
| 4. REMOVE FUEL PUMP |
![]() |
Holding the fuel pump filter by the plastic resin part, remove the fuel pump.
![]() |
Remove the O-ring and fuel pump spacer from the fuel pump.
| *1 | O-ring |
| *2 | Fuel Pump Spacer |
| *a | (5 mm (0.1969 in.) |
| 5. REMOVE NO. 2 FUEL SUCTION SUPPORT |
![]() |
Disengage the 3 claws and the clamp as shown in the illustration, and remove the No. 2 fuel suction support from the No. 1 fuel suction support.
| 6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
![]() |
Remove the fuel pressure regulator assembly from the No. 1 fuel suction support.
| 7. REMOVE NO. 1 FUEL SUCTION SUPPORT |
![]() |
Disengage the 3 claws as shown in the illustration.
| *a | Lock |
Release the lock, disengage the 2 claws, then slide the No. 1 fuel suction support and remove it.
![]() |
Remove the O-ring from the fuel suction tube assembly.