Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type)

REAR SEAT ASSEMBLY (for Fold Down Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEATBACK ASSEMBLY


    B288464E01
  1. Engage the 2 hooks and temporarily install the rear seatback assembly.

  1. Install the 2 bolts in the sequence shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Pull back the rear seatback assembly.



2. INSTALL REAR SEAT CUSHION LOCK HOOK
  1. Engage the 4 claws to install the 2 rear seat cushion lock hooks.



3. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY


    B272781E02
  1. Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
    Text in Illustration 
    *1
    Rear Side of Rear Seat Cushion Frame
    *2
    Rear Seat Cushion Lock Hook

  1. Align the rear side of the rear seat cushion frame with the 2 hooks.

  1. Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.

    NOTICE:
    Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.



4. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)
  1. Install the package tray trim panel assembly.

  1. Connect the 2 package tray trim suspenders.