Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type)

REAR SEAT ASSEMBLY (for Fold Down Seat Type) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    B283290
  1. Remove the 44 hog rings and the bench type rear seat cushion cover from the bench type rear seat cushion pad.



2. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the 2 rear seat headrest assemblies.



3. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)
  1. Remove the rear seat center headrest assembly.



4. REMOVE REAR SEATBACK COVER


B272786E01
Text in Illustration 
*1
Protective Tape

HINT:
  1. Use the same procedure for the remaining parts. (w/ Center Top Tether anchor Bar)
  2. Use the same procedure for both sides. (w/o Center Top Tether anchor Bar)

  1. Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.



5. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

HINT:
B272898
Use the same procedure for both sides.

  1. Turn the rear seatback lock release button in the direction indicated by arrow to remove it.



6. REMOVE REAR SEATBACK STOP BUTTON GROMMET

HINT:
B272886
Use the same procedure for both sides.

  1. Disengage the 2 claws to remove the rear seatback stop button grommet.



7. REMOVE REAR SEAT HEADREST SUPPORT


B287824
  1. Disengage the hook.



    B287823
  1. Disengage the 2 hooks and unfasten the 2 zippers.



    B287826
  1. Disengage the 12 claws to remove the 6 rear seat headrest supports. (w/ Rear Center Seat Headrest)



    B273320
  1. Disengage the 8 claws to remove the 4 rear seat headrest supports. (w/o Rear Center Seat Headrest)



8. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY


B287822
  1. Remove the rear seatback frame sub-assembly.



9. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    B272902
  1. Remove the 2 bolts and the rear seatback lock assembly RH from the rear seatback frame sub-assembly.



10. REMOVE REAR SEATBACK LOCK ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.



11. REMOVE SEPARATE TYPE REAR SEATBACK COVER


    B287785
  1. Remove the 12 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.