Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type)

REAR SEAT ASSEMBLY (for Fold Down Seat Type) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL SEPARATE TYPE REAR SEATBACK COVER


    B287786E01
  1. Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 12 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Do not soil or scratch the separate type rear seatback cover.
    2. When installing hog rings, minimize wrinkles as much as possible.



2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH


    B272902
  1. Install the rear seatback lock assembly RH with the 2 bolts.

    Torque:
    32 N*m{ 326 kgf*cm , 24 ft.*lbf }



3. INSTALL REAR SEATBACK LOCK ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.



4. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY


    B287822
  1. Temporarily install the rear seatback frame sub-assembly.



    B287823
  1. Fasten the 2 zippers and engage the 2 hooks.



    B287824
  1. Engage the hook to install the rear seatback frame sub-assembly.



5. INSTALL REAR SEAT HEADREST SUPPORT


    B288459E01
  1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seat frame sub-assembly. (w/ Rear Center Seat Headrest)
    Text in Illustration 
    *a
    protruding

    1. Engage the 12 claws to install the 6 rear seat headrest supports.



    B273319E01
  1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seat frame sub-assembly. (w/o Rear Center Seat Headrest)
    Text in Illustration 
    *a
    protruding

    1. Engage the 8 claws and install the 4 rear seat headrest supports.



6. INSTALL REAR SEATBACK STOP BUTTON GROMMET

HINT:
B272886
Use the same procedure for both sides.

  1. Engage the 2 claws to install the rear seatback stop button grommet.



7. INSTALL REAR SEATBACK LOCK RELEASE BUTTON

HINT:
B273714
Use the same procedure for both sides.

  1. Turn the rear seatback lock release button in the direction indicated by arrow to install it.



8. INSTALL REAR SEATBACK COVER


B272787

HINT:
  1. Use the same procedure for the remaining parts. (w/ Center Top Tether anchor Bar)
  2. Use the same procedure for both sides. (w/o Center Top Tether anchor Bar)

  1. Engage the 4 claws to install the rear seatback cover.



9. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)
  1. Install the rear seat center headrest assembly.



10. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the 2 rear seat headrest assemblies.



11. INSTALL BENCH TYPE REAR SEAT CUSHION COVER


    B283291E01
  1. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 44 new hog rings.
    Text in Illustration 
    *1
    New Hog Ring
    *2
    Hog Ring Pliers

    NOTICE:
    1. Do not soil or scratch the bench type rear seat cushion cover.
    2. When installing hog rings, minimize wrinkles as much as possible.