Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR

FRONT WIPER MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY


  1. Check the automatic stop position.



      E229455E01
    1. Operate the windshield wiper motor assembly.
      Text in Illustration 
      *a
      Mark for Blade Position

    2. Stop the windshield wiper motor assembly operation.

    3. Check the automatic stop position of the front wiper arm and blade.

      OK:
      The front wiper arm and blade stops at the position as shown in the illustration.

      NOTICE:
      There are 2 marks, so make sure to inspect using the correct mark.