Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR

FRONT WIPER MOTOR > INSPECTION

for Preparation Click here


NOTICE:
Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.



1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


    E184489E05
  1. Check the windshield wiper motor operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Windshield Wiper Motor Assembly)

    1. Apply battery voltage and check the operation of the windshield wiper motor.

      Specified Condition:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 5 (+1)
      Battery negative (-) → 4 (E)
      Windshield wiper motor assembly operates at low speed (LO).
      Battery positive (+) → 3 (+2)
      Battery positive (+) → 4 (E)
      Windshield wiper motor assembly operates at high speed (HI).



2. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


    E184489E03
  1. Check the windshield wiper motor operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Windshield Wiper Motor Assembly)

    1. Apply battery voltage and check the operation of the windshield wiper motor.

      Specified Condition:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1 (+1)
      Battery negative (-) → 5 (E)
      Windshield wiper motor assembly operates at low speed (LO).
      Battery positive (+) → 4 (+2)
      Battery positive (+) → 5 (E)
      Windshield wiper motor assembly operates at high speed (HI).