Terminals No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
A74-1 (+B2) - B84-104 (E1)
| B - W-B
| Power source of ECM
| Ignition switch ON
| 11 to 14 V
|
A74-2 (+B) - B84-104 (E1)
| B - W-B
| Power source of ECM
| Ignition switch ON
| 11 to 14 V
|
A74-20 (BATT) - B84-104 (E1)
| Y - W-B
| Battery (for measuring battery voltage and for ECM memory)
| Always
| 11 to 14 V
|
A74-26 (3) - B84-104 (E1)
| BE - W-B
| 3 shift position switch signal
| Ignition switch ON and shift lever in 3
| 11 to 14 V
|
Ignition switch ON and shift lever not in 3
| Below 1 V
|
A74-41 (CANH) - B84-104 (E1)
| L - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 1)
|
A74-49 (CANL) - B84-104 (E1)
| W - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 2)
|
B84-104 (E1) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
B84-52 (NSW) - B84-104 (E1)
| BE - W-B
| Park/Neutral position switch signal
| Ignition switch ON and shift lever in P or N
| Below 1 V
|
Ignition switch ON and shift lever not in P and N
| 11 to 14 V
|
B84-53 (R) - B84-104 (E1)
| R - W-B
| R shift position switch signal
| Ignition switch ON and shift lever in R
| 11 to 14 V
|
Ignition switch ON and shift lever not in R
| Below 1 V
|
B84-54 (N) - B84-104 (E1)
| V - W-B
| N shift position switch signal
| Ignition switch ON and shift lever in N
| 11 to 14 V
|
Ignition switch ON and shift lever not in N
| Below 1 V
|
B84-55 (2) - B84-104 (E1)
| LG - W-B
| 2 shift position switch signal
| Ignition switch ON and shift lever in 2
| 11 to 14 V
|
Ignition switch ON and shift lever not in 2
| Below 1 V
|
B84-56 (D) - B84-104 (E1)
| L - W-B
| D shift position switch signal
| Ignition switch ON and shift lever in D or 3
| 11 to 14 V
|
Ignition switch ON and shift lever not in D and 3
| Below 1 V
|
B84-57 (SL) - B84-104 (E1)
| P - W-B
| SL solenoid signal
| Ignition switch ON
| Below 1 V
|
Vehicle driving under lock up range
| 11 to 14 V
|
B84-72 (THO1) - B84-95 (ETHO)
| Y - B
| ATF (Automatic Transmission Fluid) temperature sensor signal
| ATF temperature: 10°C (50°F) to 145°C (293°F)
| 4 to 0 V
|
B84-73 (P) - B84-104 (E1)
| P - W-B
| P shift position switch signal
| Ignition switch ON and shift lever in P
| 11 to 14 V
|
Ignition switch ON and shift lever not in P
| Below 1 V
|
B84-74 (L) - B84-104 (E1)
| V - W-B
| L shift position switch signal
| Ignition switch ON and shift lever in L
| 11 to 14 V
|
Ignition switch ON and shift lever not in L
| Below 1 V
|
B84-76 (SLT+) - B84-75 (SLT-)
| P - L
| Shift solenoid valve SLTsignal
| Engine idling speed
| Pulse generation
|
B84-78 (S2) - B84-104 (E1)
| L - W-B
| Shift solenoid valve S2 signal
| Ignition switch ON
| Below 1 V
|
1st or 4th gear
| 11 to 14 V
|
2nd or 3rd gear
| Below 1 V
|
B84-79 (S1) - B84-104 (E1)
| R - W-B
| Shift solenoid valve S1 signal
| Ignition switch ON
| 11 to 14 V
|
1st or 2nd gear
| 11 to 14 V
|
3rd or 4th gear
| Below 1 V
|
B84-80 (ST) - B84-104 (E1)
| GR - W-B
| Shift solenoid valve ST signal
| Shift lever in D (3rd gear ←→ 4th gear)
| Below 1 V ←→ 11 to 14 V
|
B84-125 (NT+) - B84-124 (NT-)
| L - G
| Transmission revolution sensor (NT) signal
| Driving at approximately 20 km/h (12 mph)
| Pulse generation (See waveform 3)
|