Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B107881E05
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Switch Assembly)

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    4(U) - 3(B)
    2(SD) - 1(D)
    UP
    Below 1 Ω
    5(SU) - 4(U)
    2(SD) - 1(D)
    OFF
    Below 1 Ω
    5(SU) - 4(U)
    3(B) - 1(D)
    DOWN
    Below 1 Ω

    If the result is not as specified, replace the power window regulator switch assembly.