AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor) > SYSTEM DESCRIPTION |
| GENERAL |
Deceleration sensors used for the airbag system are installed on various parts on the vehicle and calculate the deceleration rate of each part during a collision.
Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag based on the information from each sensor.
| DEPLOYMENT CONDITION |
FRONTAL COLLISION

Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensor.
Frontal collision signals are used to deploy the airbags except the side airbags and curtain shield airbags.
SIDE COLLISION (1)*1

The side airbags are deployed based on signals from the side airbag sensors and airbag sensor assembly.
SIDE COLLISION (2)*1

The curtain shield airbags are deployed when both of the following conditions are met: