AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor) > DATA LIST / ACTIVE TEST |
| READ DATA LIST |
Warm up the engine.
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Body / SRS Airbag / Data List.
According to the display on the tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Display Type Information | Display type identification information/ LR: Display indicated by LH/RH DP: Display indicated by Driver/Passenger | LR | - |
| Number of Past DTC | Number of past DTCs/ Min.: 0, Max.: 255 | 0 | - |