AIRBAG SYSTEM (w/o VSC) > DATA LIST / ACTIVE TEST |
| READ DATA LIST |
Warm up the engine.
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / SRS Airbag / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Display Type Information | Display type identification information/ LR: Display indicated by LH/RH DP: Display indicated by Driver/Passenger | LR | - |
| Number of Past DTC | Number of past DTCs/ Min.: 0, Max.: 255 | 0 | - |